Buying Guide
The best dodge shock lift supports are selected by matching the support to the vehicle opening, not merely to the Dodge nameplate. A hood support, trunk strut, and tailgate gas spring may all be called lift supports, but their attachment points, working lengths, force requirements, and intended positions can differ. The products above cover several Dodge Ram, Challenger, Charger, Magnum, and related Chrysler applications. Treat the vehicle information and replacement number as the primary identification tools.
Start with the opening and position
First identify what the support moves. The Ram selections in this comparison are front hood supports. Challenger choices are rear trunk supports, and the Charger-focused selections are front hood supports. A listing for a rear trunk or hatch should not be substituted for a hood strut simply because the vehicle model is similar.
Also check whether the listing specifies a side. The A-Premium Challenger option documents left- and right-side rear trunk placement, while the TadaMark listing identifies front left and right placement. A single-side product can be correct for an application that uses one support, but it should not automatically replace a paired design.
Verify year, body style, and configuration
Year ranges can overlap without being interchangeable. The two Challenger products illustrate why configuration matters: BOXI is listed for coupe trunks without a spoiler, while A-Premium is listed for coupes with a spoiler. Those are distinct fitment descriptions, so compare the vehicle configuration with the listing before selecting either one.
The same discipline applies to the Charger products. ARANA identifies 2011-2020 Dodge Charger applications and also lists Chrysler 300 coverage, while SCITOO lists later Charger and Chrysler 300 applications with a different set of replacement references. TadaMark covers an earlier multi-model group that includes Charger, Magnum, Chrysler 300, and Challenger. Confirm the exact model year, body style, and hood or trunk arrangement rather than relying on a broad model label.
Use replacement numbers as a cross-check
Original-equipment and interchange numbers are often the fastest way to narrow the selection. Ram listings in this guide repeatedly identify references such as 55276321AA, 55276321AB, 55276321AC, SG314036, and 4364. If one of those numbers is printed on the old support or appears in your vehicle documentation, compare it with the listing’s references.
For Challenger trunk supports, common supplied references include 04589645AA, 04589645AB, 244263, 6657, and SG414063. Charger listings identify references including 6558, PM3526, SG314073, 55113776AA, and 55113777AA. A matching reference is useful, but it does not replace checking the vehicle’s year and configuration because several listings cover overlapping applications.
Compare operating dimensions
When supplied, extended and compressed lengths provide a practical second check. AiYiGu lists 18.98 inches extended and 10.98 inches compressed for its Ram front hood supports. OTUAYAUTO lists 19 inches extended and 11 inches compressed, while TIKMAX lists 18 inches extended and 11.50 inches compressed center to center. These measurements are close but not identical.
For Challenger trunks, BOXI lists 11.38 inches extended and 7.63 inches compressed. TadaMark’s front hood support listing gives 12.41 inches extended and 8.50 inches compressed. Compare measurement method as well as the number: center-to-center dimensions may not be directly equivalent to an overall product length. If a listing does not provide operating lengths, use the replacement number and application data more heavily.
Check package contents and installation details
Several selections are described as pairs, including AiYiGu, C-Tzu, TIKMAX, BOXI, A-Premium’s Challenger set, ARANA, and TadaMark. Other listings show a one-unit specification or have package wording that needs clarification. Confirm whether your vehicle requires one support or two and whether the package includes both sides.
Installation descriptions are generally straightforward for the selected products. Multiple listings state that a flat-head screwdriver or simple tools can be used, and some say no special tools or additional fasteners are required. AiYiGu specifically notes that screws or other fasteners are not included because none are required for its described installation. Support the hood or trunk safely while removing the old part; do not assume the remaining support will hold the opening during replacement.
Construction claims vary by listing. A-Premium describes a black painted body for anti-rust purposes. ARANA describes Grade 45 carbon steel, chrome plating, and wear-resistant hydraulic oil for its Charger application. SCITOO describes a sealed lift bracket and a protected piston rod. C-Tzu describes high-strength leak-proof piston seals and corrosion resistance.
These are supplied design descriptions, not independent test results. They can help distinguish what each listing documents, but they should not be treated as proof of service life in a particular climate or vehicle. Prioritize verified fitment first, then use construction information as a secondary comparison factor.
Final recommendation
AiYiGu Front Hood Struts for Dodge Ram ranks first overall in this specification-based comparison under the published weighted criteria.
The final choice among the best dodge shock lift supports depends on the documented features that match your intended use.
AiYiGu Front Hood Struts for Dodge Ram is the highest-scoring returned product and the first overall specification-based choice. Its combination of broad Ram coverage, explicit operating lengths, two-piece packaging, and multiple replacement references makes the identification process relatively clear. OTUAYAUTO is a close alternative when its 19-inch by 11-inch dimensions and stated Ram application match your truck.
For Challenger owners, choose by spoiler configuration: BOXI documents the without-spoiler coupe trunk, while A-Premium documents the with-spoiler version. For Charger applications, ARANA provides more construction detail, SCITOO focuses on later Charger and Chrysler 300 replacement references, and TadaMark offers a broader multi-model earlier-application description. These are the top dodge shock lift supports in this comparison because their supplied specifications make fitment, position, or dimensions easier to evaluate.
Before ordering, compare the vehicle year, body style, opening position, original support number, and available dimensions. If any of those details conflict, pause and verify the application rather than assuming the part is interchangeable.
Frequently Asked Questions
How do I choose the best dodge shock lift supports for a Dodge Ram?
Match the Ram series and year range first, then compare the original support number and operating length. AiYiGu, OTUAYAUTO, C-Tzu, A-Premium, and TIKMAX list different combinations of Ram applications and references. Check whether the package is a pair and compare the stated dimensions with the support being replaced.
Are Dodge Challenger trunk supports interchangeable with and without a spoiler?
Do not assume they are. BOXI is listed for 2008-2020 Challenger coupe trunks without a spoiler, while A-Premium is listed for 2008-2021 coupes with a spoiler. The configuration distinction is a central part of the fitment information, so select the version that matches the vehicle.
What measurements matter for a lift support?
Extended and compressed lengths are the most useful supplied measurements, but the measurement method matters. AiYiGu and OTUAYAUTO provide Ram operating lengths, TIKMAX gives center-to-center dimensions, and BOXI and TadaMark provide measurements for Challenger or multi-model applications. Compare equivalent measurement descriptions rather than numbers alone.
Several selected listings describe installation with a flat-head screwdriver or simple tools and state that no special tools are required. The exact hardware situation depends on the application. Safely prop the hood or trunk before removing an old support, and follow the installation instructions for the specific vehicle.
Why should I compare the replacement part number?
The replacement number provides an additional identification check when several listings cover similar Dodge model years. Ram references such as 55276321AA and SG314036, Challenger references such as 04589645AA and SG414063, and Charger references such as 6558 and SG314073 appear in the supplied listings. Use the number together with vehicle and configuration details for a more reliable match.