10 Best Dirt Bike Powersports Grips for Fitment and Comfort

Choosing the best dirt bike powersports grips comes down to fitment on 7/8" bars, the texture that matches your riding style, and the rubber compound that absorbs vibration on long days. This guide compares ten grip sets by their listed specifications, so you can match a pair to your bike and your trails without guesswork.

Selections prioritize bar fitment and diameter specifications (25%) because a secure, compatible grip is essential for control, followed by documented model coverage (20%) for broader vehicle compatibility. Compound and texturing design (18%) and grip length and geometry (15%) assess handling feel and usability, while vibration and fatigue control (12%) addresses comfort during longer rides. Installation method and included hardware (10%) complete the weighting by highlighting setup practicality.

Advertising Disclosure Revactic participates in affiliate programs, including the Amazon Associates Program. We may earn a commission when you buy through links on this site, at no extra cost to you.

The Revactic ranking

Top 10 picks

2
JXPANG 7/8" Motocross Handlebar Grips with Wrist Throttle Assist
Ergonomic Add-On

JXPANG 7/8" Motocross Handlebar Grips with Wrist Throttle Assist

A 22mm/24mm grip pair with a biomimetic textured surface and a bundled wrist throttle assist device. The product specs cover 50cc-250cc pit bikes, ATVs, scooters, and go-karts alongside mainstream motocross models.

  • 120mm overall grip length
  • Inner diameters L-22mm / R-24mm
  • Wrist throttle assist device included in the package
9.2
Check price View offer at Amazon
3
Chiallco Soft Rubber 7/8" Dirt Bike Grips (Waffle, Black)
Waffle Classic

Chiallco Soft Rubber 7/8" Dirt Bike Grips (Waffle, Black)

A 120mm pair in soft rubber with a waffle pattern. The 22mm left grip fits a 22mm bar directly, while the right grip is listed with a 24mm inner diameter and softer texture for throttle compatibility.

  • Full waffle pattern across the grip body
  • Soft rubber compound
  • 120mm length with a black adhesive inner core
9.0
Check price View offer at Amazon
4
POCRRMCB Pro Taper Silicone Motocross Grips (Black/Red)
Silicone Feel

POCRRMCB Pro Taper Silicone Motocross Grips (Black/Red)

A 22mm/24mm silicone grip pair in a Pro Taper profile. The listing explicitly broadens fitment to motocross, dirt bikes, electric bikes, mountain bikes, scooters, and kids low-riders, which is uncommon for a dirt-bike-focused set.

  • Silicone compound rather than rubber
  • Pro Taper-style profile
  • Multi-color option set under one parent listing
8.9
Check price View offer at Amazon
5
Coxotom Universal Motorcycle Handle Grips (Diamond Pattern)
Wide Bike Fit

Coxotom Universal Motorcycle Handle Grips (Diamond Pattern)

A 22mm/24mm pair built from non-slip rubber with a vintage diamond tread. The fitment list names Harley, Honda, Yamaha, Suzuki, Kawasaki, and dirt bikes, giving it the broadest on-paper category coverage in this set.

  • Standard 7/8" left / 1" right configuration
  • Vintage diamond tread pattern
  • Non-slip rubber compound marketed for long drives
8.8
Check price View offer at Amazon
6
HJSIUTV Universal 7/8" Rubber Gel Dirt Bike Grips (Green)
Gel Compound

HJSIUTV Universal 7/8" Rubber Gel Dirt Bike Grips (Green)

A 22mm left / 24mm right pair in a rubber gel compound, with a stiffer inner core designed to improve bonding to the bar. Fitment is listed for KX, KLX, YZ, WR, TTR, CR, CRF, XR, DR, and DRZ model lines.

  • Rubber gel compound with a stiffer inner core
  • 22mm / 24mm inner diameters
  • Embossed surface pattern for added palm friction
8.7
Check price View offer at Amazon
7
carleef Anti-Slip Waffle Rubber Grips (Purple)
Gift-Ready Pair

carleef Anti-Slip Waffle Rubber Grips (Purple)

A 22mm left / 24mm right waffle-pattern pair built from rubber described as high-grade and high-temperature resistant. The listing explicitly addresses CRF, KXF, YZF, KLX, and WRF model families.

  • Waffle pattern rubber construction
  • 22mm left / 24mm right inner diameters
  • Multiple colorways under one parent group
8.7
Check price View offer at Amazon
8
HIAORS 7/8" Soft Rubber Off-Road Grips (Black)
Pit Bike Specialist

HIAORS 7/8" Soft Rubber Off-Road Grips (Black)

A 22mm/24mm pair in soft rubber, explicitly aimed at 50cc-125cc Chinese pit bikes and common CRF, YZ, KLX, KX, and TTR platforms. Install is described as direct slide-on without glue.

  • 22mm left / 24mm right inner diameters
  • Soft rubber compound
  • Documented fitment for 50cc-125cc pit bikes
8.5
Check price View offer at Amazon
9
JFG RACING 7/8" Anti-Slip Dirt Bike Grips (Red)
Mid Length

JFG RACING 7/8" Anti-Slip Dirt Bike Grips (Red)

A 22mm left / 25mm right grip pair at 123mm long, listed as a replacement for OEM grips on CR, CRF, TRX, XR, CT, and SX/EXC/XC-W platforms. Anti-slip rubber and an ultra-bonding inner core are both named in the spec list.

  • 123mm overall length
  • 22mm left / 25mm right inner diameters
  • Ultra-bonding inner core for slide-on retention
8.5
Check price View offer at Amazon
10
POCRRMCB Pro Taper Silicone Grips (Black/Green)
Color Variety

POCRRMCB Pro Taper Silicone Grips (Black/Green)

Another silicone Pro Taper pair from the same maker, listed with 22mm left and 20mm right inner diameters. The 20mm right-side specification is unusual and worth checking against your throttle tube before ordering.

  • Pro Taper ergonomic profile
  • Silicone compound
  • Multi-color body available under one parent group
8.3
Check price View offer at Amazon

Buying Guide

When you shop for the best dirt bike powersports grips, the spec sheet tells you far more than any listing image. Fitment, compound, geometry, and install method are all numbers you can check before clicking, which makes this category well suited to a specification-based comparison.

Understanding 7/8" Bar Fitment

The dominant standard in this category is a 22mm left grip and a 24mm right grip, because dirt bikes use a 7/8" (22mm) handlebar and a slightly larger 1" (24mm) throttle tube on the right. A few options in this guide document different right-side diameters, including 25mm and 20mm, which is worth checking against your throttle tube before ordering. If your bike uses a 1-1/8" fat bar, none of these standard-size grips will fit, and you will need a model specifically listed for that diameter.

Length and Geometry

Grip length determines how much bar your hand covers and how the weight of the grip sits in your palm. The candidates in this list range from compact 120mm pairs to a longer 129mm option that explicitly adds reach for larger hands, hand guards, or thumb throttles. Longer grips spread pressure over more hand surface, while shorter grips keep weight down on small-displacement pit bikes where reach is already limited.

Compound and Texturing

Most options in this category use either rubber or silicone. Rubber tends to be denser and more resistant to wear, while silicone is softer and more weather-stable. The texturing choices are also worth noting: waffle patterns spread pressure and channel grip force, diamond patterns give a flatter contact patch, and biomimetic or embossed designs aim to increase friction for sweaty or wet palms. None of these textures is universally better, so choose based on the conditions you actually ride in.

Vibration and Fatigue Control

Vibration control in grips comes from the elasticity of the compound and, in some designs, from a separate inner core. Several products in this comparison describe high-elasticity rubber, rubber gel, or stiffer inner cores designed to reduce hand fatigue. Because no two riders experience vibration the same way, treat these descriptions as starting points and match them to your typical ride length and terrain.

Installation Method

Most candidates slide on with soapy water or a light lubricant, which keeps install tool-free. A small number of designs document an adhesive inner core that grips the bar more aggressively. If you ride aggressively or use a thumb throttle, the bonded inner-core designs may hold position better, while slide-on grips are easier to swap when they wear.

Final recommendation

Generic 129mm Extra Long 7/8" Dirt Bike Grips (Purple) ranks first overall in this specification-based comparison under the published weighted criteria.

The final choice among the best dirt bike powersports grips depends on the documented features that match your intended use.

If you want a single specification-based choice, the Generic 129mm Extra Long 7/8" Dirt Bike Grips lead this comparison thanks to the longest listed reach, a clearly documented 22mm/24mm fitment, and broad coverage of common Japanese and European off-road platforms. For riders who want a more compact package or a silicone feel, the POCRRMCB Pro Taper Silicone Motocross Grips and the JXPANG 7/8" Motocross Handlebar Grips with Wrist Throttle Assist are the most specification-aligned alternatives on this list, and they round out our top dirt bike powersports grips by compound and by accessory set.

Frequently Asked Questions

Among the best dirt bike powersports grips, what size grips do most dirt bikes use?

Most dirt bikes use 7/8" (22mm) handlebars on the left and a slightly larger 1" (24mm) throttle tube on the right. Almost every grip in this comparison documents that 22mm/24mm pairing, so it is the most suitable starting point when shopping for the best dirt bike powersports grips.

Are silicone grips better than rubber for dirt bikes?

Silicone tends to feel softer and stay more stable in wet weather, while rubber is typically denser and more resistant to wear. The right choice depends on how aggressively you ride and how often you replace grips, which is why this guide lists both options among the top dirt bike powersports grips.

Do longer grips make a real difference on a dirt bike?

Longer grips add usable bar real estate, which helps riders with larger hands, gloves with extra padding, or bar-mounted hand guards. Shorter grips keep weight down and suit small-displacement pit bikes, which is why both length categories appear in this best dirt bike powersports grips roundup.

How do I install slide-on dirt bike grips?

The standard method is to apply a thin layer of soapy water, light detergent, or a purpose-made lubricant to the bar or the inside of the grip, then twist the grip into place and let it dry. Grip glue products exist, but the slide-on approach used by most candidates in this best dirt bike powersports grips comparison works for everyday riding.

Will any of these grips fit a 1-1/8" fat bar?

No. All ten grips in this guide are documented for 7/8" bars with a 22mm left side. If your bike uses a 1-1/8" fat bar, you will need a grip set specifically listed for that larger diameter.