10 Best Camry Tail Light Assemblies for Fit and Compatibility

Finding the best camry tail light assemblies means matching the exact model year and trim while balancing lens clarity, housing durability, and plug-and-play fitment. The candidates below cover outer, inner, driver, and passenger replacements across multiple Camry generations, so each entry focuses on documented OE references, materials, and installation approach rather than guesswork.

Selections prioritize model year and submodel coverage (22%), OE and Partslink reference matching (18%), lens and housing material quality (16%), weather sealing and durability (14%), and installation fit and wiring approach (14%). Package completeness, including sides, harnesses, and bulb policy, contributes 8%, while trim compatibility clarity contributes 8%. These priorities help readers identify assemblies that are more likely to match their Camry, provide suitable construction and protection, and offer a clearer installation path before purchase.

Advertising Disclosure Revactic participates in affiliate programs, including the Amazon Associates Program. We may earn a commission when you buy through links on this site, at no extra cost to you.

The Revactic ranking

Top 10 picks

3
Thomletha Pair Tail Lights for 2007-2009 Camry
Both Sides 2007-2009

Thomletha Pair Tail Lights for 2007-2009 Camry

Pair pack covering both driver and passenger sides for 2007-2009 Camry, with TO2818131, TO281913, 8156006240, and 8155006240 references and plug-and-play install.

  • References TO2818131, TO281913, 8156006240, 8155006240
  • Pair packaging with both driver and passenger sides
  • Plug-and-play install with direct replacement design
9.2
Check price View offer at Amazon
4
Huray Left Tail Light for 2018-2020 Camry LE L SE
Trim-Specific Driver Side

Huray Left Tail Light for 2018-2020 Camry LE L SE

Lists OE 81560-06720, fits the SE, L, and LE sedan trims only, and offers a plug-and-play design without wiring changes.

  • OE 81560-06720 reference
  • Fits 2018-2020 Camry SE, L, LE sedan 4-Door
  • Plug-and-play install with no wiring required
9.2
Check price View offer at Amazon
5
munirater Right Rear Tail Light for 2007-2009 Camry
Classic Gen Fit

munirater Right Rear Tail Light for 2007-2009 Camry

Replaces 8155006240 and 8155133340 with Partslink TO2819129 and TO2819131, OE-conforming construction, and a non-Hybrid compatibility note.

  • Replaces 8155006240 and 8155133340
  • Partslink TO2819129 and TO2819131
  • Non-Hybrid compatibility call-out
9.1
Check price View offer at Amazon
6
Thomletha RH Inner Tail Light for 2021-2023 Camry LE SE
Inner 2021-2023 Fit

Thomletha RH Inner Tail Light for 2021-2023 Camry LE SE

Targets the inner passenger side of 2021-2023 Camry LE and SE, references 81580-06880, and uses plug-and-play install with weather-sealed lens claims.

  • Replaces 81580-06880
  • Inner passenger side configuration
  • Plug-and-play direct replacement
9.1
Check price View offer at Amazon
7
SEBLAFF Tail Light for 2012-2014 Camry Right Side
OE-Fit Right Side

SEBLAFF Tail Light for 2012-2014 Camry Right Side

Targets the 2012-2014 Camry right-side fitment with TO2805114 reference, faster on/off response time claim, and bolt-on install design without wiring modifications.

  • Partslink TO2805114 listed
  • Bolt-on style with no modification claimed
  • Water-resistant construction referenced
9.0
Check price View offer at Amazon
8
munirater Rear Left Tail Light for 2018-2020 Camry
Driver Side 2018-2020

munirater Rear Left Tail Light for 2018-2020 Camry

Targets the left driver side of 2018-2020 Camry with TO2804134 reference, plug-and-play bolt-on install, and water plus dust resistant claims.

  • Partslink TO2804134 listed
  • Plug-and-play bolt-on design
  • Impact and heat resistance claimed
8.8
Check price View offer at Amazon
9
marddpair LH Outer Tail Light for 2012-2014 Camry Clear Lens
Clear Lens Option

marddpair LH Outer Tail Light for 2012-2014 Camry Clear Lens

Targets the left driver side of 2012-2014 Camry with a clear lens, OE 8156006470 and Partslink TO2804114 referenced, plus anti-fade lens coating language.

  • OE 8156006470, Partslink TO2804114 listed
  • Chrome and red lens styling
  • Special coating on the lens surface to reduce fading
8.6
Check price View offer at Amazon
10
Thomletha RH Right Outer Tail Light for 2007-2009 Camry
Right Side 2007-2009

Thomletha RH Right Outer Tail Light for 2007-2009 Camry

Single-piece right-side replacement for 2007-2009 Camry referencing 8155006240 and 8155133340, with plug-and-play install and full-illumination lens design.

  • Replaces 8155006240 and 8155133340
  • Right passenger side single-piece packaging
  • Plug-and-play direct replacement
8.3
Check price View offer at Amazon

Buying Guide

Choosing among the best camry tail light assemblies starts with matching the exact model year, body style, and trim, because each Camry generation uses different housings and connectors. The candidates below are organized around those fitment details so you can narrow your shortlist before thinking about lens style or housing finish.

Match Generation and Submodel First

The largest single source of returned tail lights is the wrong fitment for the model year or trim. Gen XV (2007-2009) Camry, Gen XV50 (2012-2014), Gen XV70 (2018-2020), and Gen XV80 (2021-2023) each use different outer and inner housings, and the XLE, XSE, LE, SE, L, Base, and CE trims within a generation can change connector layout or LED configuration. Listings such as the teilando Outer Pair Taillights w/Harness for 2018-2020 Toyota Camry explicitly call out that they are not for XLE or XSE with LED DRL models, which is the kind of trim-level note to verify before ordering.

Every entry on a serious shortlist should publish the OE part number and the Partslink reference so you can cross-check against your original lamp. For example, munirater Right Rear Tail Light for 2007-2009 Camry lists 8155006240 and 8155133340 alongside Partslink TO2819129 and TO2819131, while the labwork Right Side Inner Tail Light for 2021-2023 Camry XSE XLE lists 8158006870 and TO2803160. If a listing omits these references or only describes the housing visually, treat that as a fitment risk and look elsewhere.

Distinguish Outer Versus Inner Housings

Modern Camry rear lamps split into outer (mounted on the quarter panel) and inner (mounted on the trunk lid) sections, and each can fail independently. Outer-side replacements dominate this list, including the SEBLAFF Tail Light for 2012-2014 Camry Right Side and the Huray Left Tail Light for 2018-2020 Camry LE L SE, while inner-side replacements such as the Thomletha RH Inner Tail Light for 2021-2023 Camry LE SE or the labwork Right Side Inner Tail Light for 2021-2023 Camry XSE XLE address the trunk lid section. Identify which section is cracked or fogged before you choose.

Evaluate Lens and Housing Materials

Lens clarity and housing toughness influence how long the assembly will stay readable in traffic. For older 2005-2006 or 2007-2009 Camrys that see harsh sun, prioritize entries that mention fade resistance on the lens surface.

Check Weather Sealing and Vent Design

Tail light housings must keep moisture out of the internal cavity. Look for phrases such as weather-sealed housing, dust-proof, water-resistant, or well-sealed construction. The labwork entries call out weather-sealed housings tested for poor weather, and the teilando pair explicitly references water and dust resistance. These features matter if your Camry lives outdoors or sees heavy rain or snow.

Decide Between Single-Side and Pair Packs

If only one side is damaged after a minor collision or a parking lot tap, single-side replacements such as munirater Rear Left Tail Light for 2018-2020 Camry or SEBLAFF Tail Light for 2012-2014 Camry Right Side keep the work scope tight. If both outer housings are fogged, faded, or yellowed, a pair pack like the teilando Outer Pair Taillights w/Harness for 2018-2020 Toyota Camry or the Thomletha Pair Tail Lights for 2007-2009 Camry gives a consistent look across the rear.

Plan for Bulb and Harness Policy

Almost every aftermarket Camry tail lamp ships without bulbs, and the listings confirm this by stating use stock bulbs for installation or bulbs sold separately. A few packs, such as the teilando pair, add a wiring harness, while most singles rely on the existing connector. Check this policy before checkout so you are not waiting on a separate bulb order or chasing a connector adapter.

Use Lens Style to Match the Original Look

Most replacements reproduce the OEM red lens, but a few offer clear-lens styling. The marddpair LH Outer Tail Light for 2012-2014 Camry lists a chrome and red lens with clear elements, while several entries stick to a standard red lens. If you want to keep the factory appearance, default to the standard red lens; if you are intentionally changing the look, the clear-lens option gives a different rear signature while still using the OE mounting points.

Final Recommendation

teilando Outer Pair Taillights w/Harness for 2018-2020 Toyota Camry ranks first overall in this specification-based comparison under the published weighted criteria.

If you need the best camry tail light assemblies for a 2018-2020 Toyota Camry L, LE, or SE, the teilando Outer Pair Taillights w/Harness for 2018-2020 Toyota Camry stands out as the top camry tail light assemblies choice thanks to paired outer housings, a documented harness, four OEM references, and clear trim exclusions. For owners of other generations, match the year range exactly, confirm the OE and Partslink numbers, and pick between single-side and pair packaging based on whether one or both rear lamps need replacement. Following these steps will keep the install close to a true OE swap and preserve the intended rear lighting signature of your Camry.

Frequently Asked Questions

Among the best camry tail light assemblies, how do I confirm a Camry tail light assembly fits my exact model?

Compare the listing’s model year range and trim list against your Camry’s build, then verify the OE part number printed on your original lamp against the numbers in the listing. Entries such as the Huray Left Tail Light for 2018-2020 Camry LE L SE explicitly list SE, L, and LE sedan 4-Door coverage, which is the type of trim-level call-out to look for.

Do aftermarket Camry tail light assemblies include bulbs?

Most aftermarket Camry tail light assemblies do not include bulbs, and the listings in this guide note use stock bulbs for installation or bulbs sold separately. Plan to reuse your factory bulbs or buy new ones in the matching base type.

What is the difference between outer and inner Camry tail lights?

Outer tail lights mount on the rear quarter panel and contain the main brake, turn, and reverse functions, while inner tail lights mount on the trunk lid and act as supplemental or LED signature lamps depending on the trim. The labwork Right Side Inner Tail Light for 2021-2023 Camry XSE XLE is an inner-side example, while the SEBLAFF Tail Light for 2012-2014 Camry Right Side is an outer-side example.

Are pair packs worth choosing over single-side replacements?

Pair packs are worth choosing when both rear lamps are faded, cracked, or yellowed because they deliver a uniform look and save a second purchase. If only one side is damaged, single-side replacements such as munirater Right Rear Tail Light for 2007-2009 Camry or Thomletha RH Right Outer Tail Light for 2007-2009 Camry keep the work scope limited to the affected side.

Do Camry tail light assemblies need professional installation?

Most aftermarket Camry tail light assemblies use a bolt-on, plug-and-play design that drops into the factory location, but several listings still recommend professional installation for proper sealing and alignment. If you are not comfortable removing interior trunk trim panels or aligning the housing against the body lines, a professional install helps ensure a weather-tight fit.