10 Best Long Cobalt Drill Bits for Reach and Durability

The best long cobalt drill bits combine extended reach with cobalt high-speed steel for demanding drilling applications. This specification-based comparison examines length, material, point design, flute features, size coverage, and stated material compatibility. It is not a hands-on test and does not summarize customer opinions. Use the guide to match a single aircraft-extension bit or a multi-size set to the depth, diameter, and materials in your project.

We prioritise cobalt material and coating (25%) because they support durability during demanding drilling, followed by long-reach specification (20%) for access to deeper work areas. Diameter and pack coverage (15%), point and chip-control features (15%), documented material range (15%), and shank and storage practicality (10%) complete the assessment. These weighted criteria help readers balance drilling reach, material compatibility, bit selection, and everyday handling when choosing among the 10 options.

Advertising Disclosure Revactic participates in affiliate programs, including the Amazon Associates Program. We may earn a commission when you buy through links on this site, at no extra cost to you.

The Revactic ranking

Top 10 picks

2
Narwhal 1/2-Inch x 12-Inch Cobalt 2-Pack
Best large-diameter backup pack

Narwhal 1/2-Inch x 12-Inch Cobalt 2-Pack

This two-pack supplies 1/2-inch aircraft-extension bits with a 12-inch total length, 4-1/2-inch flute, black oxide coating, and a 135-degree split point.

  • Industrial-grade M35 cobalt construction
  • Two 1/2-inch bits with a plastic storage case
  • Black oxide coating and 135-degree split point
9.4
Check price View offer at Amazon
3
Greycore M35 1/2-Inch x 12-Inch Bit
Best single-bit heavy-duty format

Greycore M35 1/2-Inch x 12-Inch Bit

A single 1/2-inch by 12-inch M35 cobalt aircraft-extension bit with an industrial titanium coating and a 135-degree split point.

  • M35 cobalt with 5% cobalt stated
  • Industrial-strength titanium coating
  • 1/2-inch diameter and 12-inch length
9.3
Check price View offer at Amazon
4
HLOFIZI M35 1/4-Inch x 12-Inch 2-Pack
Best 1/4-inch replacement pair

HLOFIZI M35 1/4-Inch x 12-Inch 2-Pack

A two-piece M35 cobalt 1/4-inch by 12-inch set with fully ground construction, a 135-degree split point, premium coating, and a three-flat shank.

  • M35 cobalt high-speed steel
  • Fully ground drilling surfaces
  • Three-flat shank intended to reduce slipping
9.2
Check price View offer at Amazon
5
Drill America GLBCOX 7/32-Inch x 12-Inch
Best industrial single 12-inch bit

Drill America GLBCOX 7/32-Inch x 12-Inch

A single 7/32-inch by 12-inch cobalt aircraft-extension bit with a 135-degree split point, round shank, and gold oxide treatment.

  • 12-inch overall length
  • Gold oxide surface treatment
  • Round shank for a wide variety of holding systems
9.0
Check price View offer at Amazon
6
YIJIZE 150mm 4-Piece Cobalt Set
Best metric-size starter set

YIJIZE 150mm 4-Piece Cobalt Set

This 150mm four-piece cobalt HSS set includes 3mm, 4mm, 5mm, and 6mm bits, plus 135-degree points and twist flutes for stated chip removal.

  • 150mm length
  • Four metric diameters from 3mm to 6mm
  • 135-degree point and twist design
8.9
Check price View offer at Amazon
8
HLOFIZI M35 7/32-Inch x 6-Inch 6-Pack
Best repeated mid-size holes

HLOFIZI M35 7/32-Inch x 6-Inch 6-Pack

A six-piece M35 cobalt set of 7/32-inch by 6-inch bits with fully ground surfaces, a 135-degree split point, coating, and three-flat shanks.

  • Six 7/32-inch bits
  • M35 cobalt high-speed steel
  • Three-flat shanks and fully ground construction
8.5
Check price View offer at Amazon
10
Drill America GLBCOX 15/64-Inch x 6-Inch
Best compact aircraft-extension pick

Drill America GLBCOX 15/64-Inch x 6-Inch

A single 15/64-inch by 6-inch cobalt aircraft-extension bit with a 135-degree split point, round shank, and gold oxide treatment.

  • 15/64-inch diameter
  • 6-inch overall length
  • Round shank and 135-degree split point
8.3
Check price View offer at Amazon

Buying Guide

The best long cobalt drill bits are defined by more than an extended shaft. A useful comparison starts with the cutting material, then checks whether the length, diameter, point geometry, flute design, and shank match the job. The products here are ranked from listing specifications only. No entry was evaluated through hands-on drilling, and no customer sentiment is included.

Match the bit length to the access problem

A long bit is useful when a standard tool cannot reach through a deep workpiece, around an obstruction, or into a confined area. The 12-inch options provide the greatest stated reach in this selection. VALYRIANTOOL supplies five sizes at that length, while Narwhal and Greycore focus on 1/2-inch holes. The Drill America 7/32-inch model is another single-bit 12-inch option. HLOFIZI also lists a 12-inch 1/4-inch pair.

The six-inch aircraft-extension products can be easier to match to work that does not need maximum reach. SALI lists 6-inch fine-hole bits, HLOFIZI lists 6-inch 7/32-inch bits, and Drill America offers a 6-inch 15/64-inch model. The 150mm metric sets from YIJIZE and Zelphvt sit between these descriptions by offering four metric sizes with a stated 150mm length. Length alone does not establish drilling performance; it only describes the available access range.

Prioritize cobalt and construction details

Cobalt high-speed steel is the central category feature across the selected products. VALYRIANTOOL, Greycore, Narwhal, and both HLOFIZI entries explicitly identify M35 or 5% cobalt construction. Other listings identify cobalt high-speed steel without giving a percentage. That difference matters when comparing documentation: a stated cobalt grade provides more detail than a general material label, but it still does not prove a particular service life in your application.

Coatings also vary. Greycore lists an industrial titanium coating. Narwhal and SALI specify black oxide, while the Drill America entries use gold oxide. SALI explains that its black oxide treatment is intended to improve lubricity and retain coolant near the cutting edge. Drill America describes gold oxide as a thinner oxide treatment used to identify cobalt steel tools and says its performance is similar to uncoated tools. Treat these as documented construction differences, not guarantees of a longer working life.

Check point and flute design

A 135-degree split point appears across many of the selected products. The stated purpose is to help prevent walking or make starting easier. VALYRIANTOOL, YIJIZE, Greycore, Narwhal, HLOFIZI, SALI, Zelphvt, and Drill America all document a split-point design. For a clean start, this feature may be more relevant than simply choosing the longest bit.

Flute descriptions help distinguish the designs. VALYRIANTOOL and HLOFIZI describe fully ground construction or optimized flute geometry. YIJIZE and Zelphvt mention twist or helical flutes for removing chips and debris. SALI specifies right-hand-cut spiral flutes that move chips upward and away from the cutting area. These details are useful when access is restricted, but the listings do not provide a standardized chip-removal test or measured drilling rate.

Select diameter coverage carefully

Sets are more flexible when a project includes several hole sizes. VALYRIANTOOL covers five fractional sizes from 1/8 to 3/8 inch. YIJIZE and Zelphvt each cover 3mm, 4mm, 5mm, and 6mm. These are the most specification-aligned choices when the required diameter is not known in advance or multiple fasteners are involved.

Single-diameter and repeated-size packs have a different purpose. Narwhal and Greycore concentrate on 1/2 inch, HLOFIZI offers 1/4 inch or 7/32 inch formats, and SALI supplies twenty 1/16-inch bits. Drill America provides individual fractional sizes. A focused pack may be preferable when the drawing or repair specification already identifies one diameter, while a set reduces the need to purchase separate sizes.

Consider shank and storage information

Shank design affects how the bit interfaces with the drill. HLOFIZI lists a three-flat shank on both selected sets and says it helps prevent slipping. Drill America lists round shanks and states that they work with a wide variety of tool-holding systems. The other listings do not provide the same level of shank detail, so compatibility should be checked against the chuck or holder before ordering.

Storage is another practical distinction. Narwhal includes a plastic storage case, while the other selected descriptions emphasize the bits themselves rather than a case. A case can help keep a two-piece set together, but it does not change the cutting specifications. For sets, confirm how you will organize the sizes and protect their cutting edges between jobs.

Use the stated material guidance responsibly

The broadest material lists belong to VALYRIANTOOL, YIJIZE, Narwhal, and Zelphvt, which name combinations of hard metals, softer metals, plastics, and wood. Greycore also lists hard metals, stainless steel, cast iron, titanium alloy, hard plastics, and wood. Drill America is more specific about tough, high-tensile materials such as stainless steel, Inconel, and titanium.

HLOFIZI and SALI describe more focused applications, including wood, plastic, aluminum, soft metal, sheet metal, stainless steel, or copper depending on the model. Match the listing to the actual material rather than assuming every cobalt bit is interchangeable. VALYRIANTOOL, YIJIZE, and Zelphvt specifically advise controlling speed, pressure, and heat, which is an important operating consideration even though the supplied data does not prescribe settings.

Final recommendation

VALYRIANTOOL M35 Cobalt 12-Inch 5-Piece Set ranks first overall in this specification-based comparison under the published weighted criteria.

VALYRIANTOOL M35 Cobalt 12-Inch 5-Piece Set is the first overall specification-based choice among the best long cobalt drill bits because it combines 12-inch reach, five fractional sizes, M35 construction with 5% cobalt, a split point, and broad stated material compatibility. It is the most complete match for varied deep-hole work.

Choose Narwhal when a 1/2-inch diameter and a spare are more important than size variety. Greycore is a sensible single-bit alternative in the same large diameter, while YIJIZE is better suited to metric projects. For repeated fine holes, SALI offers quantity; for a single demanding fractional size, Drill America provides focused aircraft-extension formats. These are the top long cobalt drill bits in this comparison only in the sense of matching different documented specifications, not marketplace popularity or hands-on performance.

Frequently Asked Questions

What length should I choose for a deep hole?

Choose enough overall length to clear the obstruction and reach the intended drilling surface, while avoiding unnecessary overhang. The 12-inch VALYRIANTOOL, Narwhal, Greycore, HLOFIZI 1/4-inch, and Drill America 7/32-inch options provide the longest stated reach here. A six-inch model may be more appropriate when the access requirement is modest and the diameter is specific.

Are cobalt drill bits suitable for wood and plastic?

Several selected listings explicitly include wood and plastic among their compatible materials. VALYRIANTOOL, YIJIZE, Zelphvt, Greycore, and Narwhal list combinations of these softer materials, while HLOFIZI focuses on hard wood, plastic, aluminum, and soft metal. Compatibility claims come from product listings, so use the manufacturer’s operating guidance and match the bit to the material.

Which of the best long cobalt drill bits offers metric sizes?

YIJIZE and Zelphvt each list four metric sizes: 3mm, 4mm, 5mm, and 6mm, with a stated 150mm length. Either is a logical starting point when the project uses metric fasteners or drawings. The supplied evidence does not establish a performance difference between the two sets.

What is the benefit of a 135-degree split point?

The selected listings commonly describe the 135-degree split point as helping prevent walking or supporting faster, easier starts. It may reduce the tendency of the bit to wander during initial contact, but the evidence supplied here does not include a comparative test. Use it as a design feature rather than a guarantee of a particular result.

Do I need a round or three-flat shank?

Check the drill or holder first. Drill America lists round shanks and says they suit a wide variety of holding systems. HLOFIZI lists three-flat shanks and says they help prevent slipping. The best choice depends on chuck compatibility and the way you plan to secure the bit.